Zero Tolerance is proud to offer the Titanium Folder, a top-quality, hard-use knife equipped with the patented SpeedSafe assisted opening system. SpeedSafe enables users to deploy the blade one-handed by using an ambidextrous flipper. In addition to SpeedSafe, the Titanium Folder features a tough S30V stainless steel blade with tiger stripe Tungsten DLC (Diamond-Like Carbon) coating. The S30V blade steel is designed to provide the perfect combination of durability, wear resistance and corrosion resistance. The Tungsten DLC tiger striping not only provides a non-reflective camouflaged surface, but also enhances blade hardness and reduces friction drag. The scales are 3-D machined G-10 in the front and titanium on the back for incredible mechanical strength, a super secure grip and a solid blade lock up. Also featuring a 3/8-inch hex head pivot shaft nut that makes field adjustments fast and easy with minimal tools. In addition, this dynamic folding knife comes with Zero Tolerance’s Quad-mount system so users can configure the knife for tip-up or tip-down carry, left-handed or right-handed.

Features of Zero Tolerance Titanium Folder

• Weight: 8 oz.
• Blade Material: S30V Steel With Tungsten DLC coating
• Overall Length: 8.6"
• Blade Length: 3.75"
• Closed Length: 5.1"
• Tiger stripe Tungsten DLC blade coating is nonreflective and provides a camouflaged surface
• Made in the USA
• S30V knife steel takes and holds an edge extremely well and is also extremely tough and wear resistant
• This powdered steel's formula promotes the formation and very even distribution of vanadium carbides, which provide enhanced cutting capability
• Fine grain improves sharpness and toughness to make S30V steel easier to sharpen that other powdered steels
• SpeedSafe is a patented system that assists the user to smoothly open the knife with a manual push on the blade's thumb stud or pull back on the blade protrusion
• The heart of this assisted opening systemis its torsion bar. Closed, the torsion bar helps prevent the knife from being opened by gravity. It creates a bias toward the closed position
• After the blade is out of the handle, the torsion bar moves along its half-moon track and takes over. The blade opens smoothly and locks into position, ready for use
• Tungsten Diamond-Like Carbon (DLC) coatings lower friction, offer high wear-resistance and enhance hardness
• Coating adds nonreflectivity
• Ambidextrous flipper is part of the blade that protrudes at the knife spine when the knife is closed. When opened, the protrusion forms part of the finger guard
• G-10 knife handle material is an epoxy-filled woven glass fiber that is extremely stable and remains unaffected by temperature changes
• In a frame-lock knife, the knife handle consists of two plates of material on either side of the blade. When the knife is opened, the metal side of the frame butts up against the backend of the blade and prevents the blade from closing
• To ensure a secure lock up, one the plates is titanium
• Frame locks are manufactured so that the locking side of the frame is angled toward the interior of the knife to create a bias toward the locked position. Both the blade and lockbar are precisely angled so they fit together for a secure lockup
• Quad-mount system provides four pre-drilled areas (the top and bottom of each side of the handle) so the position of the pocket clip can be changed to the preference of the user