Pelican 1040 Micro Case

  • 4.0 star rating (1)
  • Item #: 1040-026-100
  • $18.99
Warning

Please correct the following error(s):

Pelican

Pelican 1040 Micro Case

Designed to hold sensitive components, smart phones and other small gear, the Pelican 1040 Micro Case is tough enough to protect your belongings from even the most extreme conditions. This rugged case is dustproof, crushproof and watertight, so you can feel confident that nothing will get in. Constructed from a polycarbonate resin body and stainless steel hardware, this case is made to last. With a water-resistant seal, this case can be submerged under one meter of water for up to 30 minutes, while an automatic pressure equalization valve balances the interior pressure. A lightweight insert liner gives you superior shock absorption and a Xylex latch is easy to open. Pelican includes a carabiner to attach this case conveniently to your apparel or pack.

Features of Pelican 1040 Micro Case

  • Weight with foam: 0.71 lbs
  • Weight without foam: 0.70 lbs
  • Interior dimensions: 6.50" x 3.87" x 1.75"
  • Exterior dimensions: 7.50" x 5.06" x 2.12"
  • Water-resistant seal
  • Easy open latch
  • Shock absorbing insert liner
  • Automatic pressure equalization valve
  • Carabiner
  • Polycarbonate body
  • Xylex latch
  • Stainless steel pins
  • Thermoplastic rubber O-ring
  • TL - 426 4 lb. esther foam
  • Polycarbonate purge body
  • Polyester spun-bond ePTFE oleophobic purge vent
  • 70 shore nitrile purge O-ring
  • Lid depth: 0.69"
  • Bottom depth: 0.94" (2.4 cm)
  • Total depth: 1.63"
  • Interior volume: 0.03 cu ft
  • Buoyancy: 1.26 lbs
  • Minimum temperature: -10° F
  • Maximum temperature: 199° F
  • IP67 certified
  • Description
    Pelican

    Pelican 1040 Micro Case

    Designed to hold sensitive components, smart phones and other small gear, the Pelican 1040 Micro Case is tough enough to protect your belongings from even the most extreme conditions. This rugged case is dustproof, crushproof and watertight, so you can feel confident that nothing will get in. Constructed from a polycarbonate resin body and stainless steel hardware, this case is made to last. With a water-resistant seal, this case can be submerged under one meter of water for up to 30 minutes, while an automatic pressure equalization valve balances the interior pressure. A lightweight insert liner gives you superior shock absorption and a Xylex latch is easy to open. Pelican includes a carabiner to attach this case conveniently to your apparel or pack.

    Features of Pelican 1040 Micro Case

    • Weight with foam: 0.71 lbs
    • Weight without foam: 0.70 lbs
    • Interior dimensions: 6.50" x 3.87" x 1.75"
    • Exterior dimensions: 7.50" x 5.06" x 2.12"
    • Water-resistant seal
    • Easy open latch
    • Shock absorbing insert liner
    • Automatic pressure equalization valve
    • Carabiner
    • Polycarbonate body
    • Xylex latch
    • Stainless steel pins
    • Thermoplastic rubber O-ring
    • TL - 426 4 lb. esther foam
    • Polycarbonate purge body
    • Polyester spun-bond ePTFE oleophobic purge vent
    • 70 shore nitrile purge O-ring
    • Lid depth: 0.69"
    • Bottom depth: 0.94" (2.4 cm)
    • Total depth: 1.63"
    • Interior volume: 0.03 cu ft
    • Buoyancy: 1.26 lbs
    • Minimum temperature: -10° F
    • Maximum temperature: 199° F
    • IP67 certified

Reviewed by 1 customers

Average Customer Review
4.0 Star Rating 4.0 Star Rating

Write A Review
 

Helpful found this review helpful

Verified Buyer Verified Buyer